Effective Ways of Dewatering

Many homeowners are rarely concerned about the outside of their homes beyond their fences or gates until some drastic act of nature comes upon their homes. It could be a flashflood that would catch their attention concerning the vulnerability of their home location and earth matters.

Some areas are more prone to floods with slight rainfalls due to the low lying geographical location. Any excess water in the area that does not find the right output to flow out will tend to rise quickly to flood the home; hence, homeowners need an effective dewatering process to avoid that flooding which can be very inconvenient.

Quick actions

Any homeowner who is concerned about maintaining their home in good condition must take quick actions that are preventive on the undesirable situation; else repairs and replacement works can amount to quite a substantial sum if the situation turns for the worse.

It is every homeowner or property owner’s responsibility or obligation to ensure that their properties are properly protected against excess water which must be quickly removed.

Removal options

Removing excess water is known as dewatering; there are numerous dewatering options for all types of properties. These include the simple and most basic form which is pumping or vacuuming; others involve building wells, and excavating holes to allow the excess water to run down. Hence, a bigger surface area is required.

Constructing deep wells

Deep wells for dewatering is a simple and effective solution which many property owners prefer. An excavation site may experience flooding; deep wells are good solutions to resolve the situation by lowering the water level drastically so that the excavation site would become dryer as well as safer. However, only professional well diggers or engineers should construct these deep wells because of their complexity and functionality. Specific mathematical formulas are involved in the calculations on the appropriate depth for the well to be functional and effective.

Dewatering by constructing deep wells is very common but not necessarily the only removal option for dewatering. If the situations are similar, dewatering by building deep wells is possible as this is quite a quick solution.

Inserting wellpoints

Another dewatering option is using wellpoints; these are long tubes which are pushed into the ground. Then, the excess water is sucked up by vacuum using a dewatering pump. With the installation of these wellpoints around the specific site, the excess water can be pumped off to prevent an overflow that can be dangerous.

These dewatering methods can be used either in industrial or private environments to avoid flooding the property.

If you are in the market for dewatering WA, welcome to Groundwater Control - Leaders in Environmental and groundwater management. We use the methods in this type of dewatering can also be modified for home use if necessary. Read my other articles at Ben Bradshaw's articles and also check out my bookmarks at Ben Bradshaw's bookmarks.